Wall plate and sign holder STLs
Generate printable wall plates and sign holders with bounded sizes, simple retainer rails, optional mount holes, and safe text.
What it makes
Generate printable wall plates and sign holders with bounded sizes, simple retainer rails, optional mount holes, and safe text.
Supported size options
overall width, height, backing thickness, rail width/depth, optional mounting holes, and short text.
Safe defaults
Start around 100 × 60 × 3 mm with 3 mm side/bottom rails, shallow 2 mm rail depth, and two conservative screw holes only when there is enough edge margin.
Limitations
Not code-compliant signage or electrical wall-plate hardware; verify fasteners, placement, and local requirements.
Example prompts
- make a wall plate sign holder width=120 height=70 thickness=3 text=OFFICE with two screw holes
- make a sign holder 100 by 60 by 3 mm with mount holes
Preview and STL example
Preview: A small OFFICE sign holder preview with side and bottom retainer rails plus two wall-mount holes.
Example prompt: make a wall plate sign holder width=120 height=70 thickness=3 text=OFFICE with two screw holes
STL example: Representative generated STL: one backing plate with simple retainer rails, optional through holes, and safe-character text; not legal signage or electrical cover hardware.
Next step
Open Studio, start from the example prompt, then review the size, warnings, and STL file before printing.
Generate this STL file Browse examples · Read the prompt guide