Pegboard accessory STL generator
Generate simple printable pegboard hook accessories with bounded rear-peg defaults.
What it makes
Generate simple printable pegboard hook accessories with bounded rear-peg defaults.
Supported size options
hook depth, back plate height, wall thickness, lip, rear peg count, peg diameter, and peg spacing.
Safe defaults
Start with the generic two-peg preset: 28 mm wide, 64 mm tall, 42 mm hook depth, 4 mm walls, 6 mm rear pegs, and 25.4 mm peg pitch; measure your actual board before printing a batch.
Safety limits
Fit and load must be verified. This pegboard accessory is generic printable geometry, not load-rated or fit-certified. Measure your pegboard hole size and pitch, test fit gently, and use only for light non-critical items.
Limitations
Generic pegboard hooks are not fit-certified or load-rated; measure the pegboard and test lightly before use.
Example prompts
- make a pegboard hook accessory for small tools
- make a pegboard hook with two 6 mm rear pegs and 25.4 mm pitch
Preview and STL example
Preview: A pegboard hook preview with a back plate, two rear pegs, a light-duty hook arm, and a front retaining lip.
Example prompt: make a pegboard hook accessory for small tools
STL example: Representative generated STL: a one-piece generic pegboard hook accessory with rear pegs and explicit non-load-rated fit warnings.
Next step
Open Studio, start from the example prompt, then review the size, warnings, and STL file before printing.
Generate this STL file Browse examples · Read the prompt guide