Modular grid bin STL generator
Generate simple 42 mm pitch modular-grid storage bins with conservative fit wording and test-print warnings.
What it makes
Generate simple 42 mm pitch modular-grid storage bins with conservative fit wording and test-print warnings.
Supported size options
module columns, module rows, bin height, wall thickness, floor thickness, and clearance.
Safe defaults
Start with a 1×1 or 2×1 footprint on 42 mm pitch, 0.5 mm clearance, 2 mm walls, a 2.4 mm floor, and one test print before batching.
Safety limits
Fit must be verified. This modular grid bin uses a conservative 42 mm pitch footprint, but it is not fit-certified for any third-party grid system and no affiliation is implied. Print one test bin and verify fit before batching.
Limitations
Fit is not certified for any third-party grid system and no affiliation is implied; print one test bin first.
Example prompts
- make a 2 by 1 modular grid bin
- make a modular grid bin 1x1 module and 42 mm tall
Preview and STL example
Preview: A modular-grid bin preview with an open pocket, a stepped underside foot, and visible module pitch guides.
Example prompt: make a 2 by 1 modular grid bin
STL example: Representative generated STL: a bounded open storage bin with conservative third-party grid fit warnings and no affiliation claim.
Next step
Open Studio, start from the example prompt, then review the size, warnings, and STL file before printing.
Generate this STL file Browse examples · Read the prompt guide